PERCHLORETHYLENE SOLVENT

HOW TO REMOVE INK STAINS

Below are the steps you will take to remove an ink stain prior to cleaning in a perchloroethylene solvent.

PERCHLORETHYLENE SOLVENT

HOW TO REMOVE INK STAINS

Below are the steps you will take to remove an ink stain prior to cleaning in a perchloroethylene solvent.

Step 1

Flush stain with Picrin®. If stain remains, go to step 2. If stain is gone, go to step 6.

Step 2

Apply Pyratex, then flush with Picrin® then go to step 3.

Step 3

Apply Inktastic, then flush with water or steam. If stain remains go to step 4. If stain is gone, then go to step 5.

Step 4

Apply StreeTAN®, then flush with water or steam. If stain remains, apply StreePRO®, then flush with water or steam.

Step 5

Level with Sofspot® or Multispot®. If stain remains. check out our pro tips below.

When rinsing spotting agents in drycleaning with steam or water, it is important to control moisture or “level” to help prevent spotting rings and fabric damage. To level:

  1. After fabric has been rinsed and air-dried, apply leveling agent liberally to the treated areas.
  2. Lightly tamp the wet area, including fabric area just outside of the ring.
  3. Do not flush, rinse, or dry.
  4. Continue with drycleaning process.

Step 6

Dryclean as you normally would.

Please note that we recommend testing the stain removal agent on an unexposed seam prior to application on the stain if you are unsure of the nature of the stain.

PRODUCTS USED:

PICRIN®

PYRATEX®

INKTASTIC™

STREETAN®

STREEPRO®

SOFSPOT®

MULTISPOT®

Step 1

Flush stain with Picrin®. If stain remains, go to step 2. If stain is gone, go to step 6.

Step 2

Apply Pyratex, then flush with Picrin® then go to step 3.

Step 3

Apply Inktastic, then flush with water or steam. If stain remains go to step 4. If stain is gone, then go to step 5.

Step 4

Apply StreeTAN®, then flush with water or steam. If stain remains, apply StreePRO®, then flush with water or steam.

Step 5

Level with Sofspot® or Multispot®. If stain remains. check out our pro tips below.

When rinsing spotting agents in drycleaning with steam or water, it is important to control moisture or “level” to help prevent spotting rings and fabric damage. To level:

  1. After fabric has been rinsed and air-dried, apply leveling agent liberally to the treated areas.
  2. Lightly tamp the wet area, including fabric area just outside of the ring.
  3. Do not flush, rinse, or dry.
  4. Continue with drycleaning process.

Step 6

Dryclean as you normally would.

Please note that we recommend testing the stain removal agent on an unexposed seam prior to application on the stain if you are unsure of the nature of the stain.

PRODUCTS USED:

PICRIN®

PYRATEX®

INKTASTIC™

STREETAN®

STREEPRO®

SOFSPOT®

MULTISPOT®